冷再生機作為道路就地再生施工的核心設備，常需在丘陵、山地等復雜地形作業，爬坡能力與斜坡作業穩定性直接影響施工效率與安全。在租賃場景下，由于設備流轉頻繁、使用強度不一，需從設備維護、參數適配、操作規范等多維度制定針對性措施，確保其在斜坡環境中穩定運行。

　　As the core equipment for on-site road regeneration construction, cold recycling machines often need to operate in complex terrains such as hills and mountains. The climbing ability and stability of slope operations directly affect construction efficiency and safety. In the leasing scenario, due to frequent equipment circulation and varying usage intensity, targeted measures need to be developed from multiple dimensions such as equipment maintenance, parameter adaptation, and operating standards to ensure stable operation in slope environments.

　　動力系統的精準維護與動態適配是保持爬坡能力的核心。租賃的冷再生機需面對不同坡度的作業需求，其發動機功率輸出與液壓系統響應必須保持穩定。租賃前，需全面檢查發動機工況：通過專業設備檢測功率曲線，確保在額定轉速下輸出功率達標（尤其注意長期租賃設備的積碳清理，避免功率衰減）；液壓系統需排查管路泄漏、油缸磨損情況，保證爬坡時液壓馬達對行走系統的動力傳遞無滯后。針對不同坡度，可協助承租方調整動力參數 —— 如坡度超過 15° 時，通過設備控制系統降低作業速度，將更多功率分配至行走系統，避免因動力分散導致爬坡乏力。租賃期間，需建立 “每次作業前 30 分鐘預熱 + 每日液壓油黏度檢測” 機制，防止低溫或高負荷下動力系統突發故障。

　　The precise maintenance and dynamic adaptation of the power system are the core of maintaining climbing ability. The leased cold regeneration system needs to face the operational requirements of different slopes, and its engine power output and hydraulic system response must remain stable. Before leasing, it is necessary to conduct a comprehensive inspection of the engine operating conditions: by using professional equipment to detect the power curve, ensure that the output power meets the standard at the rated speed (especially pay attention to the carbon deposition cleaning of long-term leased equipment to avoid power attenuation); The hydraulic system needs to investigate pipeline leaks and cylinder wear to ensure that there is no lag in the power transmission of the hydraulic motor to the walking system during climbing. For different slopes, the lessee can be assisted in adjusting the power parameters - for example, when the slope exceeds 15 °, the operating speed can be reduced through the equipment control system, and more power can be allocated to the walking system to avoid weak climbing due to power dispersion. During the lease period, a "30 minute preheating before each operation+daily hydraulic oil viscosity detection" mechanism should be established to prevent sudden power system failures under low temperature or high load.

　　重心控制與配重動態調整是斜坡作業穩定的關鍵。冷再生機在斜坡作業時，重心偏移易引發側翻風險，租賃設備需根據作業坡度靈活調整配重方案。租賃前需核查設備的重心基準線與極限坡度標識（通常標注于操作室顯眼位置），并根據承租方提供的施工坡度，配置可調節配重塊：坡度較緩（5°-10°）時，通過增加前橋配重增強抓地力；坡度較陡（10°-20°）時，需將部分配重后移，平衡機身前后重量比。同時，租賃設備的貨箱或作業裝置需避免超載，尤其在斜坡轉運材料時，需嚴格控制裝載量不超過設備額定載重的 80%，防止重心過度前移。對于長期租賃的設備，應每兩周檢查配重連接螺栓的緊固度，避免振動導致配重脫落引發重心失衡。

　　The control of center of gravity and dynamic adjustment of counterweight are key to the stability of slope operations. When the cold regeneration machine operates on a slope, the center of gravity deviation can easily cause the risk of rollover. The leased equipment needs to adjust the counterweight scheme flexibly according to the operating slope. Before leasing, it is necessary to verify the equipment's center of gravity baseline and maximum slope markings (usually marked in a prominent position in the operating room), and configure adjustable weight blocks based on the construction slope provided by the lessee. When the slope is gentle (5 ° -10 °), the front axle weight can be added to enhance grip; When the slope is steep (10 ° -20 °), some of the counterweights need to be moved backwards to balance the weight ratio of the front and rear of the aircraft. At the same time, the cargo box or operating equipment of the leased equipment should avoid overloading, especially when transporting materials on slopes. The loading capacity should be strictly controlled not to exceed 80% of the rated load of the equipment to prevent the center of gravity from moving too far forward. For long-term leased equipment, the tightness of the counterweight connection bolts should be checked every two weeks to avoid vibration causing the counterweight to fall off and cause an imbalance in the center of gravity.

　　行走系統的抓地力強化是防滑防陷的基礎保障。租賃的冷再生機行走系統（履帶式或輪胎式）需根據施工路面條件進行針對性處理。履帶式設備需檢查履帶板花紋深度（不低于原深度的 60%），磨損嚴重時及時更換帶防滑齒的履帶板；輪胎式設備需確保胎壓均勻（誤差不超過 0.2bar），并根據路面泥濘程度更換越野花紋輪胎。在斜坡作業前，可協助承租方在履帶或輪胎表面噴涂防滑劑（尤其在雨后或結冰環境），并清理履帶鏈軌間的碎石、泥土，防止卡滯導致行走打滑。租賃期間需建立行走系統 “作業后即時清理 + 每周潤滑” 制度，避免泥沙磨損履帶銷軸或輪胎輪轂，影響行走穩定性。

　　The enhanced grip of the walking system is the fundamental guarantee for anti slip and anti sinking. The walking system of the leased cold recycling machine (track type or tire type) needs to be treated according to the construction road conditions. Crawler type equipment needs to check the depth of the tread pattern on the track shoes (not less than 60% of the original depth), and replace the track shoes with anti slip teeth in a timely manner when they are severely worn; Tire type equipment needs to ensure uniform tire pressure (with an error of no more than 0.2 bar), and replace off-road tread tires according to the degree of muddy road surface. Before working on the slope, the lessee can assist in spraying anti slip agents on the surface of the tracks or tires (especially after rain or in icy environments), and cleaning the gravel and soil between the track chains to prevent slipping caused by jamming. During the lease period, a walking system of "immediate cleaning after operation+weekly lubrication" should be established to avoid mud and sand abrasion of track pins or tire hubs, which may affect walking stability.

　　標準化操作規范與實時監測是風險防控的最后防線。租賃方需對承租方操作人員進行專項培訓，重點講解斜坡作業禁忌：爬坡時保持勻速（不超過 3km/h），避免中途急停或換擋；斜坡轉向時采用 “小角度多次轉向” 方式，防止離心力加劇重心偏移；作業時需打開設備傾角監測系統，當實時傾角超過安全閾值（通常設定為 25°）時，立即觸發聲光報警，強制停機檢查。同時，租賃設備應配備遠程定位與狀態監測功能，租賃方可通過后臺實時查看設備作業坡度、行走速度等數據，發現違規操作時及時提醒承租方調整，從源頭降低安全風險。

　　Standardized operating procedures and real-time monitoring are the last line of defense for risk prevention and control. The lessee shall provide special training to the lessee's operators, focusing on the taboos of slope operation: maintain a constant speed (not exceeding 3km/h) when climbing, and avoid sudden stops or gear shifts halfway; When turning on a slope, the "small angle multiple turns" method is used to prevent centrifugal force from exacerbating the center of gravity shift; When working, the equipment tilt angle monitoring system needs to be turned on. When the real-time tilt angle exceeds the safety threshold (usually set at 25 °), the sound and light alarm will be triggered immediately, and the machine will be forced to stop for inspection. At the same time, the leased equipment should be equipped with remote positioning and status monitoring functions. The lessee can view real-time data on the equipment's operating slope, walking speed, etc. through the background, and promptly remind the lessee to adjust when violations are found, reducing safety risks from the source.

　　本文由冷再生機租賃友情奉獻.更多有關的知識請點擊:http://m.622410.cn真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Cold Recycling Machine Rental For more information, please click: http://m.622410.cn Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.