水泥撒布車和冷再生機在道路施工過程中的應用_行業資訊

行業資訊

水泥撒布車和冷再生機在道路施工過程中的應用

來源：http://m.622410.cn/ 日期：2023-04-17

針對實際的道路維修，須要水泥撒布車和冷再生機共同出戰進行，大概的修理措施就是先選擇檢驗樣本開展抽樣解析，隨后對須要再造的地面開展就地冷再生檢修，隨后在派撒布車上場灑布水泥。那么其具體施工過程是什么呢？接下來水泥撒布車出租廠家小編就來介紹一下。

For actual road maintenance, cement spreaders and cold recycling machines need to work together. The general repair measure is to first select inspection samples for sampling analysis, then carry out on-site cold recycling maintenance on the ground that needs to be rebuilt, and then dispatch spreaders to sprinkle cement on site. So what is the specific construction process? Next, the editor of the cement spreader rental manufacturer will introduce it.

施工流程

Construction process

1、水泥撒布

1. Cement spreading

依照配比布置的混凝土劑量和再造材質的高干密度等數劇，測算獲得每平米的混凝土凈重，選用水泥自動撒布車在地面上均勻?yàn)⒉蓟炷痢?/div>

Calculate the net weight of concrete per square meter based on the dosage of concrete arranged in the ratio and the high dry density of the recycled material. Use a cement automatic spreader to evenly distribute the concrete on the ground.

2、冷再生機施工

2. Cold regeneration machine construction

對半幅4.6m地面應用WR240開展就地再造，2.4m的銑刨寬度2次工作就可成功半幅施工，WR240再生機銑刨拌和深度為20cm，行駛速度為7m/min。

On site reconstruction of half 4.6m of ground using WR240 can be successfully carried out with a milling width of 2.4m in two operations. The milling and mixing depth of WR240 recycling machine is 20cm, and the driving speed is 7m/min.
水泥撒布車出租

3、平整和夯實

3. Leveling and compaction

WR240就地再生結束后，1臺26噸單鋼輪壓路機隨后開展靜壓1遍，隨后平地機開展平整;接著，26噸單鋼輪壓路機開展強振夯實3遍和弱振3遍進行復壓，終使用26噸膠輪壓路機夯實5遍成功終壓。

After WR240 local regeneration, a 26 ton single drum roller will be statically pressed once, and then the grader will be leveled; Next, a 26 ton single steel wheel roller was used to carry out strong vibration compaction for 3 times and weak vibration compaction for 3 times for re compaction, and finally, a 26 ton rubber wheel roller was used to compact 5 times successfully for final compaction.

4、遮蓋養生

4. Covering for health preservation

擊實結束的道路，馬上應用水車勻稱噴撒一遍水，并遮蓋復合土工膜開展養生7天，養生期內上、下午各撒水一次。

After the compaction is completed, the road should be immediately sprayed with water evenly by a water truck, and the composite geomembrane should be covered for 7 days of curing. During the curing period, water should be sprinkled once in the morning and once in the afternoon.

以上就是水泥撒布車和冷再升機在現實公路施工中的施工流程內容了，在具體運用中，更為強大的動力，更加節約了土建工程時間，提升了施工效率，防止了由于人工操作導致的不良影響危害，同時很大的節約了人才資源和時間，充分確保了全部項目的品質。更多相關內容就來我們網站http://m.622410.cn咨詢了解吧！

The above is the construction process of cement spreaders and cold reheaters in real highway construction. In practical applications, they have more powerful power, save more time in civil engineering, improve construction efficiency, prevent adverse effects and hazards caused by manual operation, and greatly save talent resources and time, fully ensuring the quality of all projects. For more related content, come to our website http://m.622410.cn Consult and understand!

上一條：冷再生機如何進行銑刨及拌和的工作？

下一條：冷再生機銑刨施工工藝先進性的表現